EnglishFeuerlöschschaum Gestell
Entsprechend den Projektanforderungen wird das Feuerlöschschaum-Skid-DiFF-System in verschiedenen Ausführungen vorgeschlagen. Abhängig von den unterschiedlichen Parametern, bspw. Art der Schaumdosierung, Absperrventil, Schaumtankkapazität, Temperaturanforderungen, etc. wird das Feuerlöschschaum-Skid-DiFF-System konfiguriert.
Die Schaumtank-Skid-DiFFS-Systeme sind als MF-, MS-, ML-, MY-, UMF- und UMS-Serien modelliert. Das Standardausführung besteht aus einem offenen Grundrahmen, der mit einem Schaumkonzentrattank, einem Steuerventil, einer Schaummischausrüstung und anderem Zubehör ausgestattet ist.
Compressed Air Foam Systems (CAFS)
Standalone Foam System
The system is custom designed in a common base frame with all equipment packaged. Skid consists of steel pressure vessel, high pressure nitrogen cylinders, foam tank, control valves, regulator panel. The system also consists of an electrical control panel which is used for monitoring and controlling the system from remote locations.
Foam Tank Skid
Hauptmerkmale von Skids
Maßgeschneidertes Design
Verschiedene Kapazitätsmodelle
Kohlenstoffstahl oder Edelstahl 316 Tank
50Liter / 80Liter N2 Zylinder
SS-316 Regler
Überwachung & Control Panel
Flammenmelder-Eingänge für den automatischen Betrieb, Bis zu 8 Eingänge (Standard)
Setzt die Überwachung von
CAFS fort
N2-Druck
Frischwassertankfüllstand
Systementladung
Hauptstrom
Schaumkonzentrat
Regelventil öffnen/schließen
Fernsteuerung
Optionen
SIL-2 Bedienfeld
SIL-2 Flammensensoren
Ex-geschützte Solarstromversorgung
Redundante N2-Zylinderbank
Redundanter Druckregler
Foam Tank Skid
MF Series skid
Completely bolted type skid
The MF Series diffs skid is a completely bolted type skid. The skid frames are manufactured using stainless steel 316 material and painted or powder coated. Fasteners are stainless steel 316 and self-locking type. The skid is suitable for foam tank sizes ranging from 60gallons to 170gallons. The skid is designed for 4-point lifting and is load tested. Additional inductors are supplied for projects with hose reel requirement and the skid can accommodate up to 2 additional hose reel inductors.
Foam Tank Skid
MS Series skid
A welded type skid
The MS Series is a welded type skid. The skid frames are manufactured using mild steel square tubes (optional: stainless steel 316). The skid is suitable for foam tank sizes ranging from 200gallons to 650gallons. The skid is designed for 4-point lifting. Skids are load tested.
Foam Tank Skid
ML Series skid
A totally enclosed skid
The ML series is a totally enclosed skid which is of the completely welded type. The skid frames are manufactured using mild steel square tubes (optional: stainless steel 316). The skid has been analyzed and designed based on DNVGL-ST-E271 2.7-1. The grade of all the materials including pad eye plate used for the skid are considered as S275J2. The skid is insulated using suitable insulation. The skid is suitable for foam tank sizes ranging from 60gallons to 650gallons. The skid is designed for 4-point lifting and is load tested. These skids are specially built for installations in low temperature climate conditions. Skid is suitable for -4°F (-20°C).
UMF Series skid
A USCG compliant skid
The UMF Series skid is a completely bolted type skid. The skid frames are manufactured using stainless steel 316 material and painted or powder coated. Fasteners are stainless steel 316 and self-locking type. The skid is suitable for foam tank sizes ranging from 60gallons to 170gallons. The skid is designed for 4-point lifting and is load tested. Additional inductors are supplied for hose reel requirement and the skid can accommodate up to 2 additional hose reel inductors. UMF series is a USCG Compliant skid and the listed foam proportioning equipment are used such as FM Approved water motor turbine or UL listed foam inductors. These skids are available with only AFFF-3%, US Mil-Spec Foam Concentrate type. (USCG Certification under progress)
BLADDER TANK
Accordance with ASME section VIII
The Foam Bladder tank is supplied for projects with bladder tank requirement, the bladder tanks are manufactured in accordance with ASME Section VIII, Div. 1 and are internally coal tar epoxy coated and Red enamel coated for exterior of the skid. Tank is provided with level gauge; hydraulic operated foam concentrate valves. All fasteners and isolation valves are SS-316. UL listed ratio controllers are used for DIFF and hose reel station connection. Third party certification such as ABS, DNVGL or any other classification society based on project requirement.
“Solberg Foam Bladder tank, Ratio Controllers and Marsol DiFFS Nozzles are UL listed with Solberg ARCTIC™ 3% MIL-SPEC AFFF and RE‑HEALING™ RF3, 3% FOAM CONCENTRATE”
Hauptmerkmale der Gestelle
Robustes Design
4-Punkt-Heben
Einfache Wartung
SS-316 Löschschaumtank
Eingebaute Schaumfüllpumpe
Füllstandsanzeige (LLI)
Schauminduktor oder Wassermotor-Schaumpumpe
Sprühflutventil oder motorbetriebenes
Lackierung und Beschichtung nach Offshore-Standards
Compliance
ABS
CAP-437
USCG
DNVGL
BV
LRS
UL
FM
IMO
Optionen
Super Duplex
Kupfer-Nickel
Titanrohre
Titanventil
Füllstandsanzeige
Elektrische Anlagen in explosionsgefährdeten Bereichen
Qualitätsprüfung
Druckprüfung (Rohrleitung)
Materialzertifikate
Konformitätszertifikat
FAT-Zertifikat
